gebrauchter Thermocycler Techne Genius 40 x 0,5 mL FGEN05TD

Hersteller/Typ:  Techne Genius Cycler 40 x 0,5 mL Mikrozentrifugenröhrchen
Lieferumfang: wie abgebildet, kein weiteres Zubehör, Anleitung als pdf auf Anfrage verfügb.
Zustand: technisch und optisch gut
Weiteres: (Angaben aus der Anleitung, nicht zwangsläufig komplett auf das hier angebotene Modell zutreffend):
Temperature control precision: ±0.1°C
Maximum Hold Time: 99 hrs 59 min
Temperature accuracy ±1°C
40 x 0.5ml microcentrifuge tubes (The Heat up and Cool down rates given are for two typical blocks with the Heated Lid switched off. For heat
up and cool down rates for other blocks please contact Techne Sales Department.)
Typical Heat up rate: between 55°C and 90°C 2.5°C/sec, Maximum 2.8°C/sec
Typical Cool down rate: between 90°C and 55°C 1.6°C/sec, Maximum 1.8°C/sec
Block uniformity (over full range): ± 0.6°C
Programmable ramp rate (heat or cool): from 1°C/min to 60°C/min
Programmable ramp rate resolution: 1°C
Incremental/decremental Segment Hold Time: -99 to +99sec, 1sec intervals
Incremental/decremental Temperature: -5.5°C to +5.6°C
Temperature range: 4°C to 99°C
Number of Programmes: 99
Number of segments per programme: 50
Maximum total number of segments: 247
Number of repeat cycles per programme: 99
Programme to programme linking: Yes
End of programme alarm: Yes
Pause button: Yes
Auto restart: Yes
Power consumption: max 620W

Dimensions
Height 260 mm, Width 220 mm, Length 420 mm, Weight 11.3 kg
Parallel Port: An 80-column PC-compatible printer is required to print out profile data.
Serial Port: This socket is provided as an RS232 communication link. With the appropriate software you can also select programmes and remote start or stop them from a PC.
Specification for the Integral Heated Lid: Temperature range Fixed control, at the top of the tubes, 105°C
Temperature stability ±1°C
Over-temperature cutout Fixed at 160°C (plate temperature of 105°C, top of the tubes 105°
Temperature sensor Thermistor
Heater Type Silicone rubber mat
Heater Power 132W
Warm up time 3 min approx.
The Heated Lid only comes on if the set temperature is above 35°C